How Do Kitchen Fitters Level Kitchen Units?
Kitchen fitters level units using adjustable feet, spirit levels, and laser levels. Packing pieces compensate for unlevel floors. Getting the first base unit perfectly level sets the reference for the entire kitchen — every subsequent unit is levelled from this point.
Adjustable Feet and Laser Levels
Modern kitchen base units come fitted with adjustable plastic feet that can be raised or lowered to compensate for uneven floors. A professional fitter uses a combination of a spirit level and a laser level to establish a consistent working height across the full run of base units. The laser level projects a horizontal reference line across the entire room, making it possible to level units at both ends of a long run precisely. This technique is far more accurate than a spirit level alone and is standard practice for experienced fitters.
Why the First Unit Matters Most
The first base unit installed sets the reference height for the entire kitchen. Every subsequent unit is levelled from this point — so any error in the first unit propagates through the whole run. With 30 years of fitting experience, Pindi Sahota takes particular care with the first unit, confirming it is perfectly level in all directions before proceeding. This attention at the start of the day saves significant time in adjustment later.
Uneven Floors in Coventry Homes
Many homes in Coventry — particularly Victorian and inter-war terraced and semi-detached properties — have floors with significant falls or irregularities. These require more careful levelling work and sometimes additional packing beneath adjustable feet. A pre-installation survey identifies floor levels before installation day so the programme accounts for any extra time needed. This is one of the most valuable elements of the survey for older properties.
Related Questions
In cases of extreme floor fall, additional packing blocks are used beneath the adjustable feet to raise the cabinet to the correct height. In severe cases, a plinth can be built up to conceal the gap. This is identified at the survey stage.
Yes. Wall units are hung to a consistent height using a laser level reference line. Getting wall units level and at the correct height relative to base units is essential for a consistent finished appearance and correct appliance fit.
Yes. If base units are not levelled correctly, the worktop will not sit flat. An uneven worktop is both visually obvious and practically problematic. This is why accurate levelling of base units is the most critical part of the installation.
Yes. Plinths are fitted around the base of the kitchen after all units are levelled and worktops are fitted. The plinths conceal the adjustable feet completely, giving the kitchen a built-in appearance.
Ready to Book Your Kitchen Installation?
Book a survey and get a fixed quote within 24 hours. Survey fee £195 — credited back on booking.